Washing linen and personal items by hand can not always be considered a good solution - it will take an extremely long time and a lot of physical strength on the part of the hostess. It is much better for these purposes to connect a profile washing machine, which in our time can be found on open sale not only in a semi-automatic, but also in an automatic version.
Frequent malfunctions of washing machines
Modern washing machines are complex electronic equipment, so most of them have electronic control modules, execute user-selected programs and consist of a large number of spare parts for washing machines. In order for your washing machine to serve for a long time, you must follow the rules of operation and replace worn parts on time.
There are malfunctions common to all washing machines, regardless of brand and model. Such breakdowns include leaks, excessive vibration, failure to start the wash cycle, inability to drain, insufficient spin.
More often than others, the following are in need of repair: spare parts for washing machines: bearings, shock absorbers, engine brushes, heating elements, water level sensors, tank belt, tanks themselves, engines, electronic control modules break less often.
Semi-automatic washing machines
If there is no autonomous cold water system, and the laundry needs to be washed, then semi-automatic washing machines will be the best choice. The principle of operation is quite simple - dry laundry is placed inside, everything is sprinkled with washing powder and poured with hot water.After that, an electronic or mechanical timer is set up to 15 minutes. Next, you need to act manually - remove the laundry from the machine, rinse separately, drain the water. But as a bonus, there is a centrifuge installed on the side - it is quite capable of drying clothes.
Automatic washing machines
If the above operations are difficult to carry out, then models that can wash in a fully automatic mode will be the best choice. Here, the hostess will need a minimum of operations: the laundry is placed in the drum, up to 2 tablespoons of washing powder are sprinkled into the tray, the desired program is turned on and then the machine erases the contents in a fully automatic cycle, after which it rinses everything at least 2 times and dries with centrifuges. At the same time, machines of a similar class are found both with vertical and horizontal loading.
Material of heating elements and all linens
When choosing automatic types of washing machines, you also need to look at the weight of the laundry being washed and also the material of the heating elements and centrifuges. The whole thing often varies between 3.5-10 kg, and heating elements are made of a ceramic base or steel, while a centrifuge is made of stainless steel. The latter material is already appreciated by the fact that it not only does not undergo corrosive processes, but also easily withstands any physical impact.In other words, if you need to wash things with steel buttons or zippers in such a machine, the drum of the machine will not suffer in any way from this.
Machine revolutions
And it is also important to focus on turnover. Taking versions with increased speeds (more than 1,000 rpm) is not always considered appropriate - when drying, laundry can begin to wear out quickly. And if the washing machine supports “only” 600-800 rpm, then this will turn out to be a good solution for any family - linen and personal items can last longer.
TwinWash machines
The cost of cold water and electricity is kept at a high level. Everything can be saved if you choose a TwinWash class machine, which has two washing drums in the body. One of them is small, which allows you to quickly and cheaply wash small items - up to napkins or socks. But another high-capacity drum is useful for washing outerwear or bed linen.
inverter motor
Budget versions of washing machines are equipped with conventional electric motors, equipped with additional gearboxes and ceramic counterweights. If you need more energy savings, and so that the machine does not shake when drying things, then it is more logical to choose models with inverter motors. The latter are more expensive, but there will be practically no vibration during drying. And the machine, unlike the classic versions, will be able to work an order of magnitude longer.
