A washing machine is one of those devices without which it is impossible to imagine everyday life. A pile of clothes that would have to be washed by hand without it is a housewife's nightmare. A machine breakdown is often caused by a programmer malfunction. If it breaks down, you should find a reliable company that provides Repair of washing machines, it is better not to think about self-repair.
How to know if it is the source of the problem
The programmer is the brain of the washing machine
The programmer is an essential element of every automatic washing machine. He is responsible for the fact that the device operates in an ordered cycle, depending on the selected washing program. One cycle consists of washing, rinsing and spinning. All these actions should pass one into another without human intervention. Also, using the programmer, the water temperature and the number of revolutions of the drum are set, on which the spin efficiency depends. The device controls all the components of the machine, making it the brain of the device.
The consequences of damage to the programmer
If it gets damaged, you will feel the effects almost immediately. The set wash cycle will be violated. The machine will no longer smoothly switch between washing, rinsing and spinning. It can also happen that the device gets stuck on one of these actions or stops working altogether.Often a damaged programmer does not allow you to open the machine door after washing is completed. This element may cause unsuitable water temperature during washing.However, before you start to suspect its breakdown, it is worth checking the heating element. Too much or no heating of the water will affect the quality of the wash and even (in the case of too hot water) damage the clothes.
Reasons for its failure
Damage to the programmer can cause frequent short circuits in the electrical system. This is an element that is very sensitive to sudden voltage changes, especially in older type washing machines that do not have proper protection. Often this component is mechanically damaged during the repair of other elements adjacent to it. A broken or cracked damper of a washing machine also contributes to the failure of the programmer. In many cases, its repair is unprofitable. Usually you just need to replace the programmer with a new one. This is the task of an experienced specialist, it is better not to repair it yourself. The costs associated with restoring this item depend primarily on the model of the washing machine and the cost of the repair, which varies by region.
