Daewoo washing machine error codes

Daewoo washing machines cannot be called market leaders, but a certain percentage of consumers still prefer this manufacturer. Under this brand, quite reliable equipment is produced, but it is not immune from breakdowns. But it implements self-diagnostic systems that notify users of malfunctions. Knowing the error codes of Daewoo washing machines, we can quickly identify the breakdown and return the machine to good condition.

Error codes for Daewoo washing machines are indicated by numbers and Latin letters, and they are displayed on displays that display the washing time. As soon as the self-diagnosis system registers the occurrence of any malfunction, an error code appears on the display. You can decipher the code by reading the brochure that came with the machine, or by using our review.

In other words, the same scheme is used for diagnostics of error codes of washing machines Ariston.

We put all the codes for Daewoo brand washing machines in a table. With its help, you can not only find out about the nature of the malfunction, but also get information about the method of troubleshooting. There are not so many errors themselves, so it will take a maximum of 1-2 minutes to diagnose a breakdown.As for repairs, their duration depends on the skill level of the user or repairer.

The code	Description of the problem	Possible causes
OE	Drain not working	The drain pump and its electrical circuits are checked; The patency of the drain system is checked; It is necessary to check the condition of the filter and clean it from foreign objects.
IE	Slow filling of water into the tank or water is not poured at all	The tap at the entrance to the machine is checked - it is quite possible that it turned out to be closed; The water pressure in the water supply is checked. If necessary, measures to increase pressure are applied; The condition of the mesh filter at the entrance to the machine is checked; It is necessary to test the solenoid valve and check the electrical circuits; The pressure switch is checked.
UE	Unbalance of laundry in the tub	If this error occurs, it is necessary to redistribute the laundry manually - it may be crumpled, which causes a strong imbalance in the tank; It is necessary to check and adjust the position of the washing machine at the installation site.
LE	Sunroof door not closed or sunroof lock malfunction	It is necessary to check the condition of the door and close it tightly; The operability of the hatch lock is being checked.
E8	Load sensor error	It is necessary to test the load sensor and, if necessary, replace it.
E9	Pressure switch error	The pressure switch with tubes is checked, as well as the connecting circuits.
H6	An open circuit has occurred	The performance of the heating element and its electrical circuits is checked.

Thus, we can fix many malfunctions on our own.And only in some cases that require the intervention of specialists, you need to contact the service center. Also, the Daewoo washing machine error code table does not indicate the need to check the controller - the board that controls the entire washing machine. Some errors may appear due to her fault. The same situation is with Whirlpool washing machine errors.

Checking the controller is possible only in a service center, since special equipment is needed to diagnose the electronics. In some cases, the boards are refurbished, and in other cases they are simply replaced. On our website you can also find Elgy washing machine error codes.