Smart modern washing machines are good because they can independently determine their own malfunctions. To do this, they are equipped with advanced self-diagnosis systems. The results of the operation of such systems are displayed on a digital display or on light indicators in the form of a specific code. And this review will tell you what error 5e means on a Samsung washing machine.
Operation of the self-diagnosis system
If Se (or 5e) is displayed on the display of the washing machine, this means that there are problems with draining dirty water. It is a little annoying that even knowing the error codes, we cannot correctly diagnose without a thorough examination and verification of all the nodes, one way or another connected with the drain. Any washing machine indicates only the approximate nature of the malfunction, so you will have to identify the faulty node yourself.
In any case, error code 5e in Samsung washing machines is informative, as it indicates a set of internal and external nodes, one way or another tied to the drain. If the washing machine displayed the inscription “Error” without specific clarifications, then it would be difficult to fix this or that breakdown on your own. Let's see what to do if the machine shows the above code on the display.
We note right away that such an error does not appear during spinning, since it is almost not related to it. It is associated with the preliminary draining of water before wringing or rinsing.. When washing, the Samsung washing machine drains dirty water at a certain stage.Detecting the impossibility of its removal, it turns off and displays the above error code.
Be sure to check the pockets of your items before putting them in the washer. Forgotten garbage or any small items can subsequently cause serious damage.
Finding and fixing faults
The Se error that has appeared on the Samsung washing machine is not at all a reason for panic. We already know its decoding, so we will immediately point out the possible reasons for its appearance:
- The pump is broken
- Clogged sewer;
- The drain hose is clogged;
- The filter of the Samsung washing machine is clogged;
- The wires feeding the pump are out of order;
- The electronic control unit has failed.
Let's consider these points in more detail.
Pump Diagnostics
If the Samsung washing machine gives error 5e, it is likely that the drain pump has failed. It is she who is responsible for draining the water. Its breakdown is indicated by a strained buzz or complete silence. In order to eliminate the breakdown, it is necessary to unscrew the filter and drain the water from the tank in manual mode. Next, remove the back cover, we find the drain pump - it is located at the bottom. Remove the pump, disconnect the wires from it and carefully inspect.
You should make sure that it is not clogged - it is blockages that can cause error 5e on Samsung washing machines. After inspection, you can try to start the pump in idle mode.If she does not respond, we boldly go to the nearest service for a new pump, as the workshops refuse to repair these nodes.
Wires and power module
If error 5e appeared on the display of the washer, and self-diagnosis showed the integrity of the drain pump, then the matter lies in other nodes. For example, it is likely that it is not receiving power. We diagnose as follows - we hook a multimeter to the power connectors in voltmeter mode, return the Samsung washing machine to its original state and start the spin program (usually it lasts 9-10 minutes). At the moment when the pump starts, voltage should appear on its connectors.
The lack of supply voltage can be explained by two reasons:
- The connecting wires are out of order - this is the lesser of the evils, since they are easy to replace on their own by choosing conductors that are suitable for the cross section;
- The control board broke - the control triac could fail here. In this case, the fee must be taken to the service, where specialists will deal with it. Sometimes boards cannot be repaired, but are completely replaced with new ones.
In the latter case, serious financial expenses may await you.
One of the most serious and unpleasant malfunctions in the washing machine can certainly be a breakdown of the drain pump. It is best to entrust its repair to a professional.
Checking the filter
If the Samsung washing machine shows error 5e, then the reason may be the most banal - the filter is clogged. And to such an extent that he cannot pass through himself the entire stream of dirty water.The problem is solved very simply - we take a basin, pour water into it, unscrew the filter and carefully clean it from dirt. After that, we return it back and try to run some program - the washing machine should work without any errors.
Troubleshooting drain issues
Error 5e in Samsung washing machines may mean a clogged drain system. The fact that the sewer can become clogged with all sorts of garbage is not a special secret for anyone. But before blaming the sewer system for all mortal sins, it is necessary to check the condition of the drain hose. One of the most common reasons for a lack of drainage is a kinked hose, pinched by the washer body or any other object.
It is also possible that the drain hose simply twists, becoming impassable.Therefore, it must be examined first. If everything is fine with it, we check for blockage - to do this, disconnect the Samsung washing machine from the sewer and throw the hose into the sink, bathroom or deep bucket. We turn on the washer and observe the results - if the water runs, then the reason lies in the sewer.
In total, we checked all the components of the Samsung washing machine - this is a pump, wires, a control module, a filter, and even a drain hose. If everything turned out to be intact and working, and the display still shows an error, you should deal with the sewer - it is quite possible that a blockage has formed in it.To eliminate it, you can use the mechanical method by threading a plumbing steel flexible cable into the pipe. We clean, try to start the washing machine again. If the cleaning went well, there will be no drain error.
The second way to clean the sewer is to use special tools. The cheapest tool is called "Mole" and is a solution of sodium alkali. Pour it into the sewer pipe, rinse with water after half an hour. Alkali will corrode organic contaminants, after which you can start the Samsung washing machine and make sure there are no errors. You can also use any other chemical to remove blockages.
