Knocking in the washing machine during washing and spinning

The washing machine pleases its owners with its ease of use and the presence of automatic washing, without which we cannot imagine our lives today. But, like any other equipment in the machine, various malfunctions can occur. One of these troubles occurs when the washing machine knocks during the spin cycle, as well as during the wash. In fact, you should not immediately rush to call the master, because the reason for this may not be a breakdown of the unit at all, but other more harmless reasons.

We will tell you about all the possible causes of knocking in the washing machine during washing and give recommendations on how to eliminate it.

Uneven distribution of laundry on the drum

This is a fairly rare problem that occurs with older models of washing machines. It consists in the following: in the process of washing or spinning, the laundry is crumpled and a large imbalance occurs, which leads to the fact that the tank of the washing machine begins to knock on the walls. In modern models, this does not occur due to the use of imbalance control systems and the “ability” of washing machines to distribute linen evenly during washing, but in older models this can be.

Wrong installation of the washing machine

If the washing machine starts to knock harder at high speeds and seems to “jump”, then the problem most likely lies in its incorrect installation. The knock in this situation does not occur from inside the washing machine, but from its vibration. You shouldn't solve this problem with anti-vibration mat for washing machine. The correct solution will be the correct installation of the unit.

The washing machine must be installed on a level surface. In order to check this, take a level and put it on the washing machine, also shake the machine to the sides - the legs should not come off the floor. Also help with the problem silicone coasters for washing machine, which you can buy in stores with household appliances.

Broken spring or damper

The design of the washing machine is made in such a way that the tank with the drum is in a movable state and hangs on springs, and rests on shock absorbers from below. This allows vibrations to be compensated and the tank to have some movement to correct the imbalance. Over time, any part of the washing machine can wear out, and springs with shock absorbers are no exception. As you understand, during operation they have a large load and they can fail.

If the spring or shock absorber is faulty, the tank may move or tilt to the side, causing it to be unbalanced and out of position. As a result, the washing machine will knock on the walls or other parts during washing. In this case, you must immediately stop the operation and eliminate the malfunction.
In order to find the cause, it will be necessary disassemble washing machine and replace damaged parts. The shock absorber mounts may also be broken or the bolt of this mount has loosened.

The problem with the counterweight

A counterweight is an artificial weight that is attached to the top and bottom of the washing machine tank in order to make the tank heavier. This is done so that during washing and especially spinning, the laundry that is in the drum cannot shake the tank and the washing machine itself.

During operation, the counterweight may loosen and start knocking; in order to fix this, you will need to disassemble the washing machine and tighten the bolts that secure it.But it may happen that the counterweight will be broken, if you disassemble the machine and see that the load is broken, then you will need to buy a new one, since finding them is not a problem. Next, install a new counterweight and assemble the machine.

Washing machine drum knocking

The knocking of the drum of the washing machine during the spin cycle or during washing can be caused by two reasons:

Debris got into the space between the drum and the tank – during the washing process, the drum of the washing machine could get bra bone, coins, paper clips or other small items that you have hammered out of your pockets. These parts can get into the gap between the cuff and the drum and get into the tank. During washing, they are in the space between the poppy and the drum and are constantly in contact with both, which causes knocking.

In order to get items, you will have to remove the front or back cover of the washing machine (depending on the model) and remove the heating element. Through the hole that appeared in place of the heating element, you can remove all excess debris.

Second the cause of the knocking of the drum of the washing machine may be the wear of the bearings, usually a knock is also accompanied by a creak. More often, a creak precedes a knock, so if you understand that the reason is precisely in them, then you should replace bearingshow to do this you can read on our website.