Like other household appliances, dishwashers need to be serviced. This will allow the devices to work for a long time without damage. It is especially important to keep the filter inside the dishwasher clean, because its insides gradually become clogged in the process of trapping food and other debris. This interferes with the normal operation of the device, which leaves dirt on cups, spoons and plates.
When carrying out welding work, you may need a welding mixture that can be filled into cylinders. All information about possible mixtures can be found at the link. The presented mixtures have the necessary certificates of quality and safety.
In obsolete models of dishwashers, non-removable filters with an automatic cleaning function were installed, which were based on the principle of a garbage chute. However, they were too noisy, so the manufacturers switched to removable filter units. Their owner must dismantle once a month to remove accumulated dirt. If a bad smell is emitted from the PMM, when diagnosing problems, first of all, you will need to check the condition of the filter.
How to dismantle the PMM filter
To perform cleaning procedures, the owner must remove the filtration unit. In most models, this element is located on the bottom.If the search is difficult, it is recommended to look at the instruction manual for the dishwasher, which describes in detail the purpose and location of each node. On modern units, there are easily unscrewed cylindrical filters. On their front side there are arrows applied by the manufacturer.
They indicate the direction in which the device can be rotated when dismantled from the flat panel without using tools during operation. It is enough for the owner to unlock the filter with an ordinary turn, and then remove it with his own hand from the dishwasher body. However, if there are fasteners, the dirt-catching device will have to be picked up with a screwdriver or tweezers. If the operations are performed correctly, the second filter structure will follow the first one.
How to clean the PMM filter
The removed filter must be immersed in a solution with a means for washing kitchen utensils, having previously been treated with a degreaser. Also a great option is to use table vinegar, which is diluted with clean water. This substance will eliminate bad odors, but it is recommended to wipe the dishwasher filter with it only with a non-hard sponge, bottle brush or an old toothbrush.
If you scrape the surfaces with an iron brush, you can damage the walls. In the process of soaking the filtration device, it is recommended to wash the dishwasher itself by wiping the area around the hole where it was located. Dishwashing liquid diluted in hot water, as well as a soft sponge, will help to carry out the work. After drying, the filter can be inserted into its rightful place, and then continue to operate the dishwasher in normal mode.
