Candy washing machine error codes

Do you have strange symbols on the display of the Candy washing machine? The machine froze, and its indicators began to flash somehow in a special way? In this case, you need to look at the error codes of Kandy washing machines and familiarize yourself with the diagnostic information. Yes, the mysterious blinking of indicators and incomprehensible letters with numbers on the scoreboard are the error information generated by the self-diagnosis system.

Knowing the error codes of Candy washing machines, we can get information about the nature of the malfunction.. It is quite possible to fix something on your own, and in some cases you will have to contact the nearest service center. In a similar way, the Atlant washing machine errors and other models.

In our review, we presented Kandy error codes in the form of two tables. The first table is for models with screens, and the second is for models with indicator lights.

Errors of Kandy washing machines of the ActivaSmart series

Error code	Description of the problem	Possible causes
E01	Breakage of the blocking of the loading hatch of the washing machine. Sunroof lock not working	It is required to check the operability of the hatch lock; The controller needs to be checked.
E02	A long set of water in the tank or no water set. Also, the error appears when the water level in the tank is too high.	The filling valve is checked; The performance of the pressure switch and controller is checked; The mesh of the filling valve is being cleaned.
E03	Too long drain or no drain at all (more than 3 minutes)	It is necessary to check the drain pump, drain system and filter; The pressure switch is checked.
E04	The pressure switch reports that the water level in the tank is too high. The error is displayed 210 seconds after the start of water collection.	It is necessary to check the control triac of the water valve. The operation of the filling valve itself is also checked. With such an error, it is possible set of water in the washing machine in the off state.
E05	Water does not heat up	The performance of the heating element is checked; The temperature sensor and controller are checked (resistance at a temperature of +25 degrees should be about 20 kOhm, at a temperature of +85 degrees - about 2.15 kOhm); It is required to check the operability of the program selector motor (winding resistance 15 kOhm), electrical circuits are checked.
E07	Too fast acceleration of the main engine. After three attempts, an error is displayed and the current program is interrupted.	There was a breakdown of the tachogenerator, the resistance of its winding is checked (nominal 156 Ohm for Hoover engines and 42 Ohm for Cezet engines).
E09	No motor rotation	It is required to check the performance of the triac or control module.

A similar scheme is also used in identifying errors washing machines Electrolux.

Errors of Kandy Aquamatic series washing machines

Error code	Number of flashes	Causes, diagnosis and repair
0	Constant burning	Checking the functionality of the control module is required
1	1	Problems with the loading door lock device
2	2	Too long filling of water for the set time. It is necessary to check the pressure switch, the filling system, you need to check the tap and check the water pressure.
3	3	Too long draining of water for the set time. The drain pump and drain system are checked, the pressure switch and its electrical circuits are checked.
4	4	The pressure switch reported an emergency water level (leakage).The pressure switch, filling valve and all related electrical circuits are checked.
5	5	Open or short circuit in the temperature sensor circuit.
6	6	An EEPROM error has been detected, diagnostics and repair of the electronic module, circuit check are required.
7	7	The hatch lock jammed in the closed state, the engine was blocked. All connected nodes and chains are checked.
8	8	Breakdown of the tachogenerator - a coil breakage or short circuit has occurred. The tachogenerator needs to be checked and replaced.
9	9	Failure of the control triac of the washing machine engine
12	12	There is no communication between the display unit and the controller. Connecting circuits are checked.
13	13	There is no communication between the display unit and the controller. Connecting circuits are checked.
14	14	Controller failure. The controller and current-carrying circuits are checked.
15	15	Failure of the controller or its software.
16	16	Faulty heating element - a short circuit or damage to the insulation of the heating element has occurred.
17	17	Tachogenerator gives incorrect signals
18	18	Incorrect voltage in the mains, controller failure. It is required to control the voltage and frequency in the network, check the electronic module.

There are not so many mistakes in Candy washing machines, so we quickly identify the faulty node.