Atlant washing machine errors

Domestic washing machines Atlant have good characteristics and are equipped with advanced self-diagnosis systems. By analyzing the operation of certain nodes, they can determine the malfunction and tell users or specialists about it.

Atlant washing machine error codes can be deciphered using the table presented in our review.

Working with the table is very easy - you need to read the information from the device and check the first column. For example, if the Atlant washing machine gives an F3 error, then this means there are problems with the heating element. Also at this moment, the glow of certain indicators will be observed (for machines with indicators). If the Atlant washing machine shows an F4 error, then the code table will tell us about the breakdown of the drain pump.

Let's consider the errors of Atlant washing machines in more detail - all codes and their decoding are presented in our table. A similar table is used to determine errors washing machines Electrolux.

Error code	Description of the problem	Possible causes
Error "Sel" or there is no glow of all indicators	There are problems with the program selector	The performance of the selector itself is checked; The controller is being tested.
Error "None" or the glow of all indicators	Too much foam in the drum	Wrong program selected - you should more correctly select a program for a particular type of fabric; It is necessary to adjust the dose of washing powder or select a different brand of detergent.
Error "F2" or the glow of the third LED	Temperature sensor failure	The operability of the sensor is checked and the integrity of the electrical circuits is monitored; The sensor is replaced and the control module is checked.
Error "F3" or the glow of the 3rd and 4th indicators	Breakdown of the heating element	The integrity of the heating element is monitored, electrical circuits are checked; It is required to check the operability of the control module.
Error "F4" or the glow of the 2nd indicator	Drain pump malfunction	The patency of the drain system is checked; Remove foreign objects from the pump; The filter is checked and cleaned; The control module and electrical circuits are checked.
Error "F5" or the glow of the 2nd and 4th indicators	Fill valve failure	The patency of the intake system is checked, the strainer is cleaned; The water pressure is monitored, the tap is checked; The operability of the solenoid valve and its current-carrying circuits is checked; The operation of the control module is checked.
Error "F6" or the glow of the 2nd and 3rd indicators	Reverse relay failure	The relay is checked and replaced; An engine check is required.
Error "F7" or the glow of the 2nd, 3rd and 4th indicators	Wrong mains parameters	The interference filter is checked and replaced; The performance of the control module is checked; The power supply parameters are checked.
Error "F8" or the glow of the 1st indicator	Overfilling the tank	The pressure switch and its electrical circuits are checked; The control module is being checked; The tightness of the cylinder is checked; The intake valve needs to be checked (possibly stuck open).
Error "F9" or the glow of the 1st and 4th indicators	Tachogenerator failure	The tachogenerator and engine should be checked; The control module and electrical circuits are checked.
Error "F10" or the glow of the 1st and 3rd indicators	Faulty loading lock. In this case washing machine won't turn on.	The operation of the electronic lock and its electrical circuits is checked; Checking the electronic module.
Error "door" or the glow of the 1st, 3rd and 4th indicators	Sunroof lock malfunction	It is required to check the position of the loading hatch and the tightness of its closure; The operation of the electronic lock and its electrical circuits is checked; Checking the electronic module.
Error "F12" or the glow of the 1st and 2nd indicators	Engine failure	The motor and its windings should be checked, the faulty motor is replaced; The control module and electrical circuits are checked.
Error "F13" or the glow of the 1st, 2nd and 4th indicators	Other breakdowns	All electrical circuits and modules are checked.
Error "F14" or the glow of the 1st and 2nd indicators	Software failure	The electronic module needs to be replaced.
Error "F15"	Leak detected	The integrity of the cuff of the loading hatch is checked; The integrity of the drain system is checked; The integrity of the tank is checked.

This table will help to understand the malfunctions of Atlant washing machines and will assist in carrying out repair work. Similar Bosch washing machine error code table presented on our website.